148-160, doi: Haque, R. (2018).

They typically have spiral threads that grip the side of the hole.A flush rivet is used primarily on external metal surfaces where good appearance and the elimination of unnecessary One early form of blind rivet that was the first to be widely used for aircraft construction and repair was the Cherry friction-lock rivet. The SPR process is described in here The self-pierce rivet fully pierces the top sheet material(s) but only partially pierces the bottom sheet. Rivets are typically fed to the rivet setter nose from tape and come in cassette or spool form for continuous production. Stay current to newsworthy trends, thought leadership, product releases, events, and more by signing up to receive our direct communications customized by industry.

However, in recent years automated riveting systems have become popular in an effort to reduce assembly costs and repetitive disorders.

Ideal for maintenance, repair and site work.

To determine the strength of the assembly a user must consult an engineering guide or the Machinery's Handbook.Rivet alloys, shear strengths, and driving conditionRivet alloys, shear strengths, and driving conditionImproved means of closing tubular rivets. PRN414 Nose Piece for 7/64 ,1/8 and 3.2mm $7.60. This allows the rivet to be easily and fully inserted, then setting allows the rivet to expand, tightly filling the gap and maximizing strength. Blind rivets, commonly referred to as "pop" rivets (POP is the brand name of the original manufacturer, now owned by Stanley Engineered Fastening, a division of Prior to the invention of blind rivets, installation of a rivet typically required access to both sides of the assembly: a rivet hammer on one side and a bucking bar on the other side. A standardized The shear test involves installing a rivet into two plates at specified hardness and thickness and measuring the force necessary to shear the plates. The pop rivet is passed through both holes in the sheet plastic / aluminium.

The main official standards relate more to technical parameters such as To become a proper fastener, a rivet should be placed in hole ideally 4–6 thousandths of an inch larger in diameter. Since the mandrel is locked into place, they have the same or greater shear-load-carrying capacity as solid rivets and may be used to replace solid rivets on all but the most critical stressed aircraft structures.


Solid rivets are one of the oldest and most reliable types of fasteners, having been found in Solid rivets are used in applications where reliability and safety count. Specifically designed for plastics and other brittle or soft materials. Per the IFI-135 standard, all blind rivets produced must meet this standard.

Got a part number? High-strength bolts have largely replaced structural steel rivets. In 1916, Royal Navy reservist and engineer Hamilton Neil Wylie filed a patent for an "improved means of closing tubular rivets" (granted May 1917).They are available in flat head, countersunk head, and modified flush head with standard diameters of 1/8, 5/32 and 3/16 inch.
2016, pp. A rivet is a permanent mechanical fastener. The tensile test is basically the same, except that it measures the pullout strength.

Solid rivets are driven using a Solid rivets are also used by some artisans in the construction of modern reproduction of Until relatively recently, structural steel connections were either welded or riveted.

Tubular rivets are sometimes preferred for pivot points (a joint where movement is desired) since the swelling of the rivet is only at the tail. Add to Cart. Materials Performance and Characterization, 7(4) doi:10.1520/MPC20170109Haque, R.,"Quality of self-piercing riveting (SPR) joints from cross-sectional perspective: A review," Archives of Civil and Mechanical Engineering, Vol. Blind rivets are used almost universally in the construction of plywood Common but more exotic uses of rivets are to reinforce There are several methods for installing solid rivets.

Originally, Cherry friction-locks were available in two styles, hollow shank pull-through and self-plugging types. These tests determine the strength of the rivet, and not the strength of the assembly. They can also be used with plastic, metal, and other materials and require no special setting tool other than a hammer and possibly a backing block (steel or some other dense material) placed behind the location of the rivet while hammering it into place. This flare (or flange) provides a wide bearing surface that reduces the chance of rivet pull-out. The most common machine is the impact riveter and the most common use of semitubular rivets is in lighting, brakes, ladders, binders, HVAC duct work, mechanical products, and electronics. Our forward-looking, integrated expertise and solutions—covering lightweighting, clean energy, infrastructure, recyclability, routing, design-to-cost, and more—helps industry leaders drive innovations for electric vehicle and mobility industries. Use our easy Part Finder to search our online catalog for select Assembly Technologies, DodgeThere’s a reason our name is synonymous with blind rivets: POPUsed in numerous applications to secure two or more components together.

In the United States, inventors such as Carl Cherry and Lou Huck experimented with other techniques for expanding solid rivets, such as the pull-through method. The pop rivet was invented in Scotland shortly before World War I. - United Kingdom Patent GB106169Improvements in and relating to rivets and riveting – United Kingdom Patent GB286471Haque, R. and Durandet, Y.,"Strength prediction of self-pierce riveted joint in cross-tension and lap-shear," Materials & Design, Vol. A wide variety of materials and platings are available, most common base metals are steel, brass, copper, stainless, aluminum and most common platings are zinc, nickel, brass, tin. The WELL-NUT rivet nut is a flanged chloroprene bushing with a brass machine nut molded into one end.